Precision Milled For Flat Seating And Consistent Finish

• Comb Slots And Holes From One Setup.The through slots that form the tines and the whole hole pattern are produced from a single reference, so tines line up with mating holes instead of being sprung into place during assembly.
• Flatness Checked Before And After Finishing.Plates are gauged flat ahead of sandblasting and again once anodizing is complete, because both steps can pull a thin plate out of flat if the run is not controlled.
• Even Matte Finish, Face To Slot Wall.Blast pressure and dwell are held consistent across the batch, so faces, slot walls and hole edges come back the same tone rather than blotching or showing bright cut marks.

Verified Capacity, Certified Quality Systems

With 20+ years of cumulative machining experience at your service, PFT delivers DFM-optimized solutions that reduce cost without compromising quality. Our ISO 9001:2015 and ISO 13485:2016 certified, TUV Rheinland-verified Shenzhen factory operates 79+ CNC machines with a monthly capacity of 300,000+ pieces.

Material Grade & Finish Options

These brackets are machined from 6061-T6 aluminum as standard, with 5052, 6063 and 7075 available depending on forming and stiffness needs. Sandblasted clear, black or custom anodizing is offered over satin or matte finishes. Every shipment includes CMM Dimensional Inspection Reports and Material Mill Certificates, with RoHS/REACH-compliant finishing available per specification.