Professional Metal Fabrication Milling And Turning Processing Aluminum CNC Machining Services

CNC processing type: rust removal, sand blasting, carbonitriding, bushing, turning, milling
Materials: aluminum, stainless steel, bronze, brass, copper, precious metals, steel alloys, precious metals
Micro machining or not: micro machining
Method: CNC milling parts/CNC turning parts
Surface treatment: polishing, etching, vibration grinding, laser engraving
Tolerance:+0.001 mm
Weight: 0.1~2.0 kg '
Surface treatment: powder coating, nickel plating, zinc plating, chromium plating
Color: OEM
Size: OEM
Our service: OEM and ODM CNC processing according to customer requirements
Equipment: CNC machining center, CNC lathe, CNC turning, milling
Product category: display accessories
Equipment: 3/4/5 axis machine tool, CNC lathe, CNC turning, CNC milling
Certificate: ISO 9001:2015 and IATF 16949

Dulling standard of end milling cutter for small turning milling composite processing:
When the end milling cutter is worn to a certain limit, it cannot be used for small turning milling combined processing. This wear limit is called the bluntness standard.
The blunting standard of end milling cutter shall be formulated mainly based on the specific conditions of turning and milling and the requirements for processing quality. Specifically, the following principles shall be met:
1. The bluntness standard of small diameter end milling cutter should not exceed the critical value of severe tool wear;
2. When the rigidity of the process system is poor, a smaller blunt standard shall be specified;
3. When turning and milling work-piece materials with poor heat resistance or temperature rise sensitive to wear, the bluntness standard shall be appropriately reduced;
4. When the machining accuracy and surface requirements are high, the blunt standard shall be reduced.
If the blunting standard is too large, it will lead to excessive cutting force, which will aggravate the deformation and vibration of the process system, and therefore cannot meet the quality requirements of turning milling composite processing. Therefore, on the basis of these principles, the dulling standard should be increased as much as possible in order to make full use of tools and improve tool durability.

FAQ:
1. How big is your facility?
Our factory covers an area of 3000-5000 square meters, with more than 30 experienced employees, located in Shenzhen, China.
2. How soon can I get the samples?
Depending on your specific project, it usually takes 10 to 20 days.
3. How to enjoy OEM services?
Usually, according to your design drawings or original samples, we will provide you with some technical solutions and quotations. After you agree, we will do it for you.
4. When I send you drawings, what should I specify?
Please tell us at least the raw materials, finishes and quantities.
Jane, can you make a design for me?
We do not provide design services. You are responsible for submitting 2D and 3D CAD drawings, and then we can provide manufacturing design review after receiving your order