CNC processing type: rust removal, sand blasting, carbonitriding, bushing, turning, milling
Materials: aluminum, stainless steel, bronze, brass, copper, precious metals, steel alloys, precious metals
Micro machining or not: micro machining
Method: CNC milling parts/CNC turning parts
Surface treatment: polishing, etching, vibration grinding, laser engraving
Tolerance:+0.001 mm
Weight: 0.1~2.0 kg '
Surface treatment: powder coating, nickel plating, zinc plating, chromium plating
Color: OEM
Size: OEM
Our service: OEM and ODM CNC processing according to customer requirements
Equipment: CNC machining center, CNC lathe, CNC turning, milling
Product category: display accessories
Equipment: 3/4/5 axis machine tool, CNC lathe, CNC turning, CNC milling
Certificate: ISO 9001:2015 and IATF 16949
Analysis of three processing routes for machining grooves of precision parts:
In precision parts processing, there are plane processing, hole processing, etc., but do you know the groove processing? The groove processing should be difficult to process and also requires high cutting tools.
1. For grooves with relatively small width and depth values and low accuracy requirements, a tool with the same width as the groove can be directly cut into a one-time molding method. After the tool cuts into the low groove, the delay command can be used to make the tool stay for a short time. The low roundness of the groove can be trimmed, and the tool feed speed can be used when withdrawing the tool.
2. For deep groove parts with small width value but large depth value, in order to avoid too high forward pressure of the tool and tool damage due to poor chip removal during grooving, feed by stages shall be adopted. In this method, after the cutter cuts into the workpiece to a certain depth, the precision part processing stops feeding and returns to a certain distance to achieve the purpose of chip breaking and chip removal. At the same time, try to select a tool with higher strength.
3. For wide groove cutting, in order to cut a wide groove, a groove wider than the tool width is usually called a wide groove. The width and depth of the wide groove have relatively high precision requirements and surface quality. When cutting wide grooves, generally use a row of tools for rough machining, and then use a fine grooving knife to cut one side of the groove until the groove is low, while the height of the finishing groove is the same as that of the other side of the groove, and then exit along the side.
Therefore, when precision parts are processing part grooves, the most important thing to pay attention to is the coaxiality and symmetry of the groove. Some problems about the groove depth are not serious, but the width of the keyway must be guaranteed, and the width must not be large.
FAQ:
1. How big is your facility?
Our factory covers an area of 3000-5000 square meters, with more than 30 experienced employees, located in Shenzhen, China.
2. How soon can I get the samples?
Depending on your specific project, it usually takes 10 to 20 days.
3. How to enjoy OEM services?
Usually, according to your design drawings or original samples, we will provide you with some technical solutions and quotations. After you agree, we will do it for you.
4. When I send you drawings, what should I specify?
Please tell us at least the raw materials, finishes and quantities.
Jane, can you make a design for me?
We do not provide design services. You are responsible for submitting 2D and 3D CAD drawings, and then we can provide manufacturing design review after receiving your order
Our products are sold all over the world, you can rest assured.
