First, before the machine works, check whether the moving parts are filled with lubricant, then start to check whether the clutch and brake are normal, idle the machine for 1-3 minutes, the machine is strictly prohibited to operate when there is a fault.
Second, in the work to maintain the correct posture, have enough energy to cope with the work; if found unwell, should immediately leave, and report to the leadership; operation must focus on the mind, chat, cooperate with each other; operators must not operate in a state of irritability, fatigue, to avoid accidents, to ensure operational safety. Before entering the workplace, all employees should check whether their dress code meets the work requirements. Flip-flops, high heels and clothes that affect safety are not allowed, and helmets must be worn for long hair.
Third, when replacing the die, first turn off the power and wait until the moving part of the press stops running before installing and debugging the die; after installation and adjustment, move the flywheel by hand for two test punches to check whether the upper and lower dies are symmetrical and reasonable, whether the screws are firm and whether the crimp circle is in a reasonable position.
Fourth, you need to wait for all other personnel to leave the machine work area, clear the debris on the workbench before starting the power to start the machinery.
Fifth. When the machine is working, it is strictly forbidden to reach into the working area of the slider and to pick and place workpieces by hand. When picking and placing workpieces in the mold, standard tools must be used. If any abnormal sound or fault is found in the machine, the power switch should be turned off immediately for inspection. After the machine is started, one person carries the material and operates the machine. Others must not press the electrical floor or foot switch plate, let alone put their hands on the working area of the machine or touch the moving parts of the machine with their hands.
Sixth, at the end of the day, the power should be turned off idle, and tidy up the finished products, trimmings and debris on the post to ensure a clean and safe working environment.
Your message must be between 20-3,000 characters!
