Before we process any product, we have to know what the testing standard of this processing is, because this can help us know whether the processing of this product is qualified, whether it is correct, these can be known, computer gong processing is also the same, then the computer gong processing before the testing standard to follow what standard?
1. in the division, copy, each division is completed, first copy the number of work coordinates, after clearing the zero and then check once the center to the two sides of the interval is common, to ensure that the division, copy the number of error-free.
2. Select the tool, install the tool, set up the tool and copy the Z-axis coordinates. According to the programming list to select the appropriate tool, before loading the tool to completely clean the tool head and shivering, after loading the tool to use the calibration table to check the tool has no deflection. After copying the number of tools to check once from the beginning, to prevent the wrong tool, copy the wrong number to the company brought significant losses.
3. transfer program, start processing: before the tool to use a single section to perform, the transfer speed and feed speed to the slowest, slow down the tool, watch the machine tool to show the Z-axis margin, check whether there are abnormalities, such as abnormalities immediately press the pause button, find the reason to deal with abnormalities, admit all normal after adjusting to the appropriate speed to start processing.
4. During the processing, we should pay attention to time to investigate the processing of any abnormalities, the tool has no wear, tool wear serious to suspend grinding, to ensure normal processing.