Metal parts, mold processing, steel processing, CNC processing, precision machining, from these years time, the application range is more and more extensive, the effect is also better than in previous years, mainly with the assistance of machinery and equipment, natural in the workmanship, quality can also be better, many industries in the development, if there is no machinery and equipment processing, efficiency, or the speed of workmanship and other manufacturers to compare the advantages of obvious.
The pursuit of high precision in the precision parts processing industry is a continuous progress, the manufacturing capacity of automated equipment will be able to improve the innovation of higher value for customers, parts machining industry is very important. The enterprise's products will be favored by the market, the quality and precision of the product is the focus of customer concern. Customers choose you, will not be familiar with each other because of the relationship with you, it must be precision parts machining can meet the needs, can improve the performance of its equipment, improve the quality of production products, to create more profits.
In the actual production and processing, we will always be the more to a variety of problems in the processing of equipment will also produce some technical problems, so that the precision parts processing errors are getting bigger and bigger, what exactly is the reason for this?
Parts processing equipment dynamic tracking error is too large and alarm, you can check whether its servo motor speed is too high; position detection components are good; position feedback cable connector is good contact; the corresponding analog output latch, gain potentiometer is good; the corresponding servo drive is normal, etc., and timely maintenance.
Of course, if the CNC machine tool movement overshoot will also cause parts processing accuracy is not good, for example, is too short acceleration and deceleration time, can be appropriate to extend the speed change time; may also be a servo motor reducer and screw between the connection is loose or rigid too poor, can be appropriate to reduce the position of the ring gain. It is worth noting that when the two-axis linkage of the parts processing equipment, the axial deformation of the circle and oblique elliptical error and other factors under the influence of the parts processing accuracy will also become poor. The deformation may be caused by the machinery is not well adjusted; while the oblique ellipse error needs to check the position deviation value of each axis first, if the deviation is too large, the position ring gain can be adjusted to exclude.
Various factors may cause changes in the machining accuracy of precision parts, requiring our technical staff to master more professional knowledge, machining enterprises rely on a high degree of talent, enterprises should continue to introduce new equipment at the same time, but also to train a variety of talents, so that the precision of the enterprise's products to keep up with the needs of the times.