Send Message
Up to 5 files, each 10M size is supported. OK
Shenzhen Perfect Precision Product Co., Ltd. 86-189-26459278 lyn@7-swords.com
News Get a Quote
Home - News - What is the analysis of the cause of oil leakage during CNC machining in cnc machining factory?

What is the analysis of the cause of oil leakage during CNC machining in cnc machining factory?

February 14, 2023

Touch the ultra-precision machining center basin friends should understand, cnc machining plant in CNC machining the whole process is very easy to produce oil leaks. In fact, it is very easy to see the part of CNC machining management center oil leakage. Mainly because of spare parts or machining center cylinder oil leakage caused by. If it is spare parts, maintenance is relatively simple. If it is a cylinder, it is very inconvenient and may cause damage to the equipment.

latest company news about What is the analysis of the cause of oil leakage during CNC machining in cnc machining factory?  0

Oil changes that do not meet the regulations usually also cause CNC machining oil leaks. Oil change in the occurrence of the problem is specifically expressed in three levels.

 

First, for low-viscosity grease parts, oil change casually replaced with high-viscosity grease, it will make the corresponding shell, hole shaft and other sealing characteristics suffer certain hazards, there is also a high probability of significantly reducing the tightness of such parts.

 

Second, precision CNC lathe machining parts do not clean the car oil tank when changing oil, the waste in the car oil tank will have a high probability of entering the lubrication system, blocking the oil channel and damaging the hydraulic seals leading to oil leakage.

 

Third, CNC machining oil change when the oil is too much, especially in the parts with rotating parts, because of the stirring effect of rotating parts, more very easy to occur oil leakage conditions.

latest company news about What is the analysis of the cause of oil leakage during CNC machining in cnc machining factory?  1

The adoption and adjustment of the lubrication system parts unreasonable and cause CNC machining oil leakage, such as CNC machining maintenance personnel overhauled using a gasoline pump with too high working pressure or too much oil, or adjust the system software working pressure, speed control valve, valve, regulator and other working pressure adjustment is too high, the total flow of CNC lathe lubrication system is too large, etc. and pumping oil system software and its sealing system software does not match If the oil leakage is too high, it will lead to oil leakage.