What are the ways to divide the turning milling composite processing procedures:
The process of machining parts in Dongguan turning milling compound machining center can be relatively concentrated. In one clamping, most or all processes can be completed as far as possible. Generally, the process can be divided into the following ways:
1. The process shall be divided according to the clamping and positioning method of parts. Different parts have different structures and shapes, and the positioning methods during processing are also different. Generally, the internal shape is positioned when machining the profile, and the internal shape is positioned according to the profile. Therefore, processes can be divided according to different positioning methods.
2. The processes are divided according to rough and finish machining. When dividing processes according to the processing accuracy, stiffness, deformation and other factors of parts, the processes can be divided according to the principle of separating rough and finish machining, that is, rough machining first and then finish machining.
3. Process is divided according to the used basis. In order to reduce the number of tool changes, reduce the idle time, and reduce unnecessary position errors, parts can be processed according to the method of tool concentration process, that is, in one clamping, use the same tool as much as possible to process all parts that can be processed by turning and milling in Dongguan, and then use another tool to process other parts.