What are the requirements of the raw material inspection standards for automotive precision parts processing? When outsourcing parts processing, the quality of automotive precision parts processing must be given high priority. Therefore, before the production and processing, sign a good outsourcing production and processing quality assurance agreement, which is conducive to binding each other's rights and obligations and presenting a favorable treatment plan for future dispute cases.
Automotive precision parts raw materials guarantee.
1, the tenderer is obliged to show the processing enterprise product approval letter and other technical documents, the processing enterprise must refer to the implementation of the test.
2, the processor's incoming inspection must be carried out with reference to the relevant industry standards.
3、The processing party is responsible for the test results. Processing party found that the quality of raw materials failed or exceeded all normal range, must immediately notify the tender party quality inspection personnel.
4, automotive precision parts processing party's storage and logistics area must be strictly distinguished between high-quality goods area, inferior goods area, stalled goods area, etc., and clearly marked to ensure that the storage of natural environment to consider the quality of raw materials regulations and properly stored and applied.
5, the bidder shall ensure that the raw material processing plant lot number attainment rate ≥ 90%, electronic device material attainment rate ≥ 95%. When lower than the overall target, the processing party must closely cooperate with the tenderer to carry out inspection and guidance, and continue to fail for three months, the tenderer should make punishment or even replace the dealer.
6, the tenderer of the finished product inspection of raw materials, such as special selection due to certain types of defects, automotive precision parts processing party should be based on the results of the tenderer's judgment, can not be returned due to the same defects.
7, for the processing party test failed raw materials, the tenderer should be resolved within 2 working days to complete the raw materials subject to return and replacement, the tenderer should order the dealer to take away failed goods in 3 working days, after the tenderer determined that the automotive precision parts processing of poor raw materials should order the dealer to return in 5 working days.