Contact Person : Perfect
Phone Number : 18575535002
November 7, 2022
CNC precision parts processing is not suitable for precision processing of all materials. Some materials are too hard and exceed the strength of the parts to be processed, which is likely to cause the collapse of equipment parts. Therefore, such materials are not suitable for precision machining, unless they are equipment parts made of special materials or laser cutting.
The requirements are for every work, because it will also endanger the quality of the equipment manufactured. Therefore, in order to maintain the quality of the equipment, we should not only have requirements on the machinery and equipment, but also on the use of staff and some processed materials., This kind of products must have certain specifications. Only when this kind of products meets the requirements, can the products produced be the ideal appearance of everyone. So let's know what the requirements of CNC precision parts processing on materials are?
The processed materials are divided into two categories, metal materials and non-metallic materials; For metal materials, the strength of stainless steel plate is the largest, followed by pig iron, followed by copper, and finally aluminum. The processing of porcelain and plastics belongs to the processing of non-metallic materials. For the strength requirements of materials, in some places, the higher the strength of materials, the better, but only the strength requirements of machined parts. Processing materials shall not be too hard; If it is harder than mechanical parts, it is difficult to process; The material must be moderately hard and soft. At least one level lower than the strength of the part. At the same time, it depends on the role of the equipment to be produced and the effective selection of the equipment. In the manufacturing process of CNC precision parts, because the manufacturing requirements and standards of each part are different, the manufacturing process plan is also different. When different process plans are selected to manufacture the same parts, their productivity and economic benefits are also different.
Enter Your Message