The use of machining centers is a complex technical project of a certain scale. It involves a series of work such as production management, technical management and personnel training. All the work should follow a certain principle of operation. This principle is the guarantee system to give full play to the benefits of the machining center. Therefore, pay attention to the use of technology is one hand, pay attention to the management of technology is essential on the other hand.
The domestic production plants have taken the machining center as a high-efficiency automation equipment, as the key equipment. However, the management of the equipment is uneven. In the management of the machining center, must advocate the production characteristics of the machining center and it needs to cooperate with the production beat of each link. Can not move the management of ordinary machine tools to CNC machine tools, in the management of the following points should be noted.
1. give full play to all the functions of the machine tool, when the machine is put into use, in order to give full play to all the functions of the machine tool, should have to carefully read the manual, a deep understanding of the various functions of the machine tool and its capabilities. According to the nature of the plant processing parts, reasonable arrangements for processing objects, processes, select the appropriate supporting parts and accessories. Prepare spare parts for wearable parts.
2. set CNC department, CNC machine tools in a special department, process technology preparation, production management preparation by the factory technology department unified. Production workshop with special technical personnel. Avoid single CNC machine tools scattered in each workshop, only processing a small number of key parts, resulting in a large number of production time idle situation. Set up a special section to facilitate the management of maintenance.
3. Reasonable arrangement of production beats, technical preparation cycle, in the arrangement of production tasks to the machining center, the process department should first process documents, processing procedures, tool cards are ready, and then send the processed parts to the processing position. In order to avoid the operator to stop to find tools, modify the program, assembly fixture and cause a long downtime.
4. Select the appropriate rules and regulations, such as CNC machine tool management system, safety operating procedures, CNC machine tool use regulations, CNC machine tool maintenance, point inspection system, etc.. At the same time, to the manufacturing and design departments to provide timely feedback.
5. Pay attention to the construction of technical teams on a complex equipment, including a variety of technical achievements, fully grasp the use of a well-trained technical team, including technology, operation, mechanical and electrical maintenance, etc., the training of personnel to have a process, leading the management of equipment departments to have a comprehensive understanding of this.
