Fine parts in practice in the operation of the strength and resistance requirements are relatively high, its operational function and service life and its appearance function has a great contact, and the progress of the appearance of the function, is unable to rely solely on the material to do, is also very uneconomical practice, but the practice of processing must make its function to reach the specification, then you need to use the appearance of the treatment skills, which can often achieve twice the result with half the effort In recent years, this skill has also been rapid development. In the mold appearance treatment category mold polishing skills is a very important link, is also an important process in the workpiece processing process. Fine parts appearance treatment process in the processing is very important, so what are the fine parts appearance treatment process? Today, let our non-standard parts processing factory to explain it to us!
Fine parts of the mold appearance polishing processing operations, not only received only the process and polishing equipment, but also by the impact of the mirror degree of the parts material, this point in the current processing has not been satisfied with the focus, which is also to show that the polishing itself is affected by the material. Although the processing skills to improve the appearance of fine parts continue to transform and upgrade, but the most used in the processing of fine parts is still mainly for hardening film accumulation, and nitriding, carburizing skills.
Because nitriding skills can obtain a very high level of appearance function, and nitriding skills process and fine parts in the steel quenching process has a very high harmony consistency, and the temperature of nitriding is very low, so that after treatment through nitriding skills do not need intense cooling process, so the deformation of fine parts will be very small, so nitriding skills are also used in the processing of fine parts to strengthen Nitriding is also one of the earliest skills used in the processing of fine parts to strengthen the external function, and it is also the most widely used at present.