Send Message
Up to 5 files, each 10M size is supported. OK
Shenzhen Perfect Precision Product Co., Ltd. 86-189-26459278 lyn@7-swords.com
News Get a Quote
Home - News - Features of active lathe parts processing

Features of active lathe parts processing

December 27, 2022

1、It is easy to ensure the accuracy of each processing surface of the workpiece. When processing the active lathe, the workpiece reverses around a fixed axis, and each appearance has the same reversal axis, so it is easy to ensure the demand of coaxiality between processing surfaces.

latest company news about Features of active lathe parts processing  0

2、The cutting process is relatively smooth. In addition to the intermittent appearance, usually the lathe processing process is continuous, unlike milling and planing, in a walk to the process, the teeth have repeatedly cut into and cut out, the impact.

 

3、Applicable to the finishing of non-ferrous metal parts. Some non-ferrous metal parts, because the material itself is low hardness, plasticity is good, with other processing methods is difficult to get a bright appearance.

latest company news about Features of active lathe parts processing  1

4, the tool is simple. Turning tool is one of the most simple tools, production, sharpening and installation are very convenient, which is convenient according to the detailed processing needs, the choice of a reasonable point of view.

 

5、The tool is simple. Turning tool is one of the simplest tools, manufacturing, sharpening and installation are very convenient, which makes it easy to choose a reasonable angle according to the specific processing requirements.