Send Message
Up to 5 files, each 10M size is supported. OK
Shenzhen Perfect Precision Product Co., Ltd. 86-189-26459278 lyn@7-swords.com
News Get a Quote
Home - News - Electrolytic polishing process

Electrolytic polishing process

October 29, 2022

Electrolytic polishing takes the workpiece to be grounded as the anode and insoluble gold as the cathode. The two poles are immersed into the electrolytic cell at the same time, and the DC current is used to generate selective anodic dissolution. The workpiece surface is gradually leveled, so as to achieve the effect of increasing the surface brightness of the workpiece.

latest company news about Electrolytic polishing process  0
1. The current specification is 100A/200A/300A/500A/1000A/15004/2000/3000, and the voltage of 50004/7500A is 12V or 15V. It can also be customized according to the actual situation of users.
2. The host adopts high-frequency rectification, including time, current, voltage, temperature control, swing setting and digital display, as well as overheating and short circuit protection devices.
3. The equipment is designed in an assembly line, which is very convenient for practical operation and greatly improves production efficiency.
4. Equipment configuration: pickling tank, electrolytic tank, cleaning tank, passivation tank and decontamination tank
5. Cao body is made of anti-corrosion 12mm PP material, meeting the environmental requirements.
6. Provide all-round technical services, including equipment commissioning and electrolytic polishing technology training.

latest company news about Electrolytic polishing process  1
Shenzhen precision parts processing
Applicable material range:
1. Stainless steel (including martensite, austenite and ferrite)
2. Aluminum and its alloys
3. Copper and its alloys
4. Iron and steel parts
General combinations include:
Rectifier+polishing tank+anode rod+cathode rod+cathode lead plate+two-stage copper wire+quartz heater+polishing solution+electrolytic hanger (add time controller+temperature controller).
Assembly process: 1. Two level wires:
1. There are 4 jumpers for wires above 500A of the rectifier, which are divided into AB colors. The A color wire is connected to the positive pole of the rectifier and the anode rod of the polishing tank (middle) B color wire is connected to rectifier cathode and polishing tank cathode rod (both sides)
2. Cathode lead plate: the lead plate shall be hung on the cathode rod (on both sides) and shall be clamped neatly.
3. Quartz heater: two pieces placed on the top corner of Cao body