During the use of stamping die, due to the natural wear of die parts, unreasonable die manufacturing process, improper installation or use of the die on the machine tool, equipment failure and other reasons, the main parts of the die will lose their original performance and accuracy. As a result, the mold technology is deteriorating, affecting the normal production, efficiency and product quality. Therefore, it is necessary to do a good job of maintenance to make the stamping die work better and increase the service life. What kind of daily maintenance do you usually need to pay attention to? There are three stages of daily maintenance that need attention.
1: Preparation before use of stamping die
Before installing the mold, the surface of the mold needs to be cleaned and maintained so that the mold mounting surface and the worktable of the press will not be damaged by pressure. It is also necessary to check whether the fastening parts are abnormal.
2: Maintenance of stamping die in use
The sliding parts of the mold shall be lubricated regularly to prevent the surface of the sliding parts from being worn due to rough operation. The mold operation status shall be paid attention to at any time, and the machine shall be stopped immediately for maintenance in case of any abnormality.
3: Disassembly of stamping die after use
After the mold is used, the mold should be removed from the press according to the correct operating procedures, and it must not be disassembled randomly. After disassembly, it shall be wiped clean and coated with oil for rust prevention.
