Computer gong processing requirements to what range of accuracy, in now so many applications is related to what?
Accuracy range.
Transfer all the programs into the computer according to the programming list, simulate with the toolpath simulation software, inspect the machining area and the highest and lowest depths of machining, determine the clamping direction of the workpiece and the clamping reserve position and the length of the tool.
Place the workpiece on the clamping tool of the machine, level the workpiece plane and verticality and parallelism, with a verticality tolerance of ±0.015 or less, then fix the workpiece firmly and start centering, following the position centering and Z-axis touch size as indicated in the programming list. (Pay attention to whether the edge finder collides with the workpiece when centering.) Input the data of mechanical coordinates X, Y and Z into the corresponding coordinates. Check whether the tool on the program list matches with the tool on the machine tool library. Simulate the program with the toolpath simulation software and check the machining area and the highest and lowest depths to determine the clamping direction, the reserved position and the length of the tool for the copper male.
Industry development relationship.
1, the use of precision level meter and other detection tools, mainly through the adjustment of the pad iron way to fine tune the level of the main bed of the computer gong processing machine tool, so that the geometric accuracy of the machine tool to the allowable tolerance range;
2, the automatic tool change device, adjust the tool magazine, robot position, stroke parameters, etc., and then use the instructions to check the action, the requirements are accurate;
3, with APC automatic table exchange machine tools, adjust the relative position of the load-bearing automatic exchange;
4, after the machine is adjusted, carefully check whether the parameters set in the CNC system and programmable controller are in line with the data specified in the random indicators, and then test the main operating functions, security measures, common command execution, etc.
5, check the normal work of the machine tool auxiliary functions and accessories.