CNC exponential control machine tool is programmed and controlled by CNC processing language, usually G code. (CNC parts processing) CNC machining G code language tells CNC machine tools which Cartesian position coordinates to use for machining tools, and controls the feed speed and spindle speed of tools, as well as tool changer, coolant and other fuCNCtions. CNC machining has great advantages over manual machining, for example, the parts produced by CNC machining are very accurate and repeatable; CNC machining can produce parts with complex shapes that cannot be finished by manual machining. CNC machining technology has been widely promoted, and most machining workshops have CNC machining capabilities. The most common CNC machining methods in typical machining workshops are CNC milling, CNC lathe and CNC EDM wire cutting (WEDM).
CNC machining operation details:
I
The installation and operation procedures of CNC machining center must be followed. Before work, protective equipment shall be worn, cuffs shall be tied, scarves, gloves, ties and aprons shall not be worn, and women's hair shall be tied in hats.
II
Check the operation of the protection, insuraCNCe, signal, position, mechanical transmission, electrical, hydraulic digital display and other systems on the equipment, and cutting can be carried out when everything is normal.
III
Before starting, check whether the tool compensation, machine zero point, workpiece zero point, etc. are correct. The relative position of each button shall meet the operation requirements. Carefully prepare and input the numerical control program.
IV
Before CNC machining, check the operation of lubrication, mechanical, electrical, hydraulic, digital display and other systems. Cutting can be carried out when everything is normal.
