CNC machining core does not spill the phenomenon of key components not assembled well, we used to be in the application of CNC machine tools machine tools in addition to pick some stronger cnc machining manufacturer in order to better be able to better quality assurance, but also must let the technical assembling staff to undertake assembling, and thus be better able to ensure its smooth operation.
The customer also has to check whether the pipeline is blocked, if it is the word to apply the cleaner to blow the drain. The water storage tank is relatively low. CNC machining core often does not sprinkle water is due to the gas inside the centrifugal water pump, the gas discharged from the pump can guarantee that it can all normal sprinkle water; compared with other difficulties, this problem is very easy to deal with relativity.
CNC high precision parts CNC lathe processing, usually is to increase the cohesion of the hazards, with CNC lathe three jaws or four jaws chuck twist tight parts, and subsequently terminate the mechanical parts processing. At the same time to make the clamping force above the mechanical equipment cutting speed to ensure that the parts do not loosen and reduce the nominal diameter force... The clamping force expands with the increase in cutting speed, and then decreases.
cnc machining manufacturer this type of work ability to make mechanical parts in the processing of the whole process smooth. Unbeknownst to us, after the three-jaw or four-jaw chuck release, the machined parts will have a large difference from the original, some occur irregular graphics, some occur elliptical type, mainly showing a relatively large error.