CNC lathe is very common in the field of CNC machining center, its production and processing of high efficiency, the actual operation is simple, not only can save a lot of human resources, more critical is able to enhance the production and processing of high efficiency. I think some basin friends have encountered: cnc CNC lathe temperature is too high, what is the actual cause of the situation? The following cnc lathe processing factory Xiaobian will give you guys a wave of analysis it!
On the one hand, the mechanical parts of the abnormal destruction and pipeline blockage and other difficult problems will produce the corresponding position of the temperature rise. Therefore, cnc cnc lathe processing plant cnc lathe temperature can be a reference element of the evaluation of cnc lathe; on the other hand, the role of mechanical parts and temperature has a close contact, the temperature is too high, will make the role of parts to reduce, and even continue to produce parts of the ablation, therefore, the temperature is also a key element of the common failure of industrial equipment caused by column cnc cnc lathe.
Therefore , temperature detection in industrial equipment failure detection occupies a very critical influence. To put it bluntly, temperature detection is the application of a variety of temperature measuring instruments and equipment, measuring the temperature of machinery and equipment equipment, and all normal operation of machinery and equipment temperature to carry out a comparison, and then diagnose the parts that cause common failures and the level of destruction.
In the column type cnc lathe industrial equipment fault detection and detection, temperature measurement can be divided into two categories of touch temperature measurement Wen non-touch temperature measurement. Touch temperature measurement has the characteristics of rapid, appropriate and convenient, so it is commonly used in various industrial production ranges.
The purpose of cnc cnc lathe slide bearing setting is to limit the work of the generator set spindle bearing so that it only bears the axial load on the generator set spindle bearing in a specific slide bearing clearance range.
A, the bearing temperature rises for the reason
1. shaft ground tile surface point contact is small, the surface is not enough, does not match the machine and equipment specifications.
2. bearing clearance of the lift far more than the design program clearance, resulting in grease into the bearing roof tile is not easy to produce oil wedge, resulting in poor wetting, resulting in the guiding bearing temperature rise, the generator set vibration expansion.
Second, the solution of the guiding bearing temperature rise
When wetting the surface of the tile, even according to the spindle bearing shaking point, although the pairing gap is the least, but because of the short spacing, wetting standards are good, friction caused by less heat, cooling effect is very good, generally not easy to cause the bearing heating condition, will not cause the tile ignition.