Machining center CNC machining how the simplest tool, simply put, first to the X direction and then to the Y direction and finally to the Z direction steps are as follows.
1, first to the X-direction, take the right side of the tool oblique side gently touch down after gently lifting the tool along the Z-direction and clear the relative coordinates of the CNC machining center.
2, the tool to the left of the material, the tool and material gently touch, the tool will be lifted, which is to note down the X value of the relative coordinates of the machine tool, the tool will move to the relative coordinates of X half, note down the X value of the absolute coordinates of the machine tool, and press (INPUT) input the coordinate system can be (some systems by measurement can also be) Fa Na can system by "measurement "can also be to the Y direction;.
3, with the tool in front of the material touch down, tool and material gently contact, the tool will be lifted along the Z direction, the relative coordinates of the machine to zero.
4, the tool mentioned behind the material, the tool and material gently contact, the tool will be lifted, which is to note the Y value of the relative coordinates of the machine tool, the tool moved to half of the relative coordinates Y, note the Y value of the absolute coordinates of the machine tool, and press (INPUT) input the coordinate system can be method that can be the system according to "measurement" can also Z to the tool Method of CNC milling machine Z to the tool will move the tool to the workpiece to Z to the zero point of the surface, the tool and the surface of the light contact, write down the machine tool at this time in the coordinate system Z to the value, input to the corresponding coordinate system.
