Send Message
Up to 5 files, each 10M size is supported. OK
Shenzhen Perfect Precision Product Co., Ltd. 86-189-26459278 lyn@7-swords.com
News Get a Quote
Home - News - Automatic tool change and spindle orientation on CNC machining center

Automatic tool change and spindle orientation on CNC machining center

December 29, 2022

The unique tool magazine of CNC machining center can realize the function of automatic tool change and spindle orientation. Compared with the general machine tool cost is higher, of course, the processing accuracy and efficiency is also higher. So it is important to choose the right machining center, so as to ensure that the CNC machining center to play the maximum benefit. So for companies to choose the machining center model is also to be quite careful, so what specifically to pay attention to? I will answer the following questions for you.

latest company news about Automatic tool change and spindle orientation on CNC machining center  0

First, the selection procedure should be reasonable, the premise is to have a comprehensive understanding of the machining center, including its performance, characteristics, type, the main parameters applicable range, etc. Only on the basis of a full understanding of the following procedures can be launched.

 

Second, choose the right type. Select the type of CNC machining process, processing objects, scope, price and other factors should be taken into account. For example, single-sided processing of the workpiece, such as a variety of plate parts, etc., should choose vertical machining work center; more than two sides of the processing of the workpiece or in the surrounding radially radiating row of holes, surface processing, should choose horizontal processing; complex surface processing, such as the guide wheel, the engine on the whole impeller, etc., you can choose five-axis machining center; for the workpiece of high precision requirements, the use of bedroom machining center; the When the size of the larger workpiece for processing, such as the machine bed, column, etc., you can choose the gantry type machining center.

latest company news about Automatic tool change and spindle orientation on CNC machining center  1

Of course the above methods are only for reference, and the final decision should be made under the conditions of process requirements and financial balance.