Send Message
Up to 5 files, each 10M size is supported. OK
Shenzhen Perfect Precision Product Co., Ltd. 86-189-26459278 lyn@7-swords.com
News Get a Quote
Home - News - Analysis of oil leakage during cnc four-axis machining?

Analysis of oil leakage during cnc four-axis machining?

February 18, 2023

cnc four-axis machining in the process of processing will occur in many different situations, oil leakage is a frequent occurrence, to solve this problem, we must find out the root cause to solve things, for processing when the phenomenon of oil leakage is also seen, then which conditions will cause oil leakage?

latest company news about Analysis of oil leakage during cnc four-axis machining?  0

Oil change does not meet the requirements.

 

Cause cnc machining center oil leakage. The problems in oil change are mainly manifested in three aspects.

 

Oil change with too much oil, especially in the parts with rotating parts, due to the churning effect of rotating parts, more likely to appear oil overflow phenomenon.

 

For the parts with high viscosity lubricating oil, change the oil to low viscosity lubricating oil at will, it will make the corresponding box, shaft hole and other sealing performance is affected to a certain extent, sometimes will greatly reduce the sealing of these parts.

latest company news about Analysis of oil leakage during cnc four-axis machining?  1

When changing oil without cleaning the oil tank, the dirt in the oil tank may enter the lubrication system, blocking the oil path, wear seals caused by oil leakage.

 

The choice of lubrication system parts and adjustment is not appropriate and cause oil leakage:.

 

For example, cnc machining maintenance personnel maintenance selected too high pressure or too much oil out of the oil pump, or adjust the system pressure, relief valve, safety valve, pressure reducing valve and other pressure adjustment is too high, CNC machine tool lubrication system flow is too large, etc. with the oil return system and sealing system does not match, it will cause oil leakage.